75' Heavy Duty Aerial Tandem Axle
The 75' Heavy Duty Aerial is designed for use with both single and tandem axle configurations. The base Quint model meets all requirements of NFPA. The aerial is rated with a 500 lb. tip load while flowing 1250 GPM at 0 degrees elevation 90 degrees perpendicular to the aerial device. This allows for no restrictions in the operation of the aerial device. Pump configurations available from 1,250 GPM through 2,250 GPM, utilizing Waterous, Hale and Darley pumps. Even CAFS can be installed when using the tandem axle. Tank configurations from 300-600 using Poly tanks. Hose bed configurations from: EHL (Ergonomic Hose Load), EZR (above the right side compartments), EZ Load (allows high side compartments both sides, with two hose beds) or ahead of the turntable with hose chutes. Many more options are available with a tandem axle without increasing the turning radius, compared to the same single axle 75' aerial chassis. In addition, there is more tire on the ground, meaning more braking capacity and a much safer apparatus.
|
Details
